XtGem Forum catalog
HomeBlog

Proper Maintenance of Automotive Engine

Yesterday saw a report, saying that Ms. White buy a new BMW X3 for the first time on the road that is stalled on the highway, so they requested that the 4S shop to replace the car, because there is no good communication, so the 4S shop door blocked, and called a number of media interviews. Night, 4S shop finally persuaded Ms. White checked the vehicle and found the reason turned out to be no oil.
Here is an Audi car owners, car dashboard never see, once in highway driving, do not look at the water table, high temperature do not know, the last flameout shut down, never not move, no way to call the Audi 4S stores, the car was towed to the repair shop, a check engine to overhaul, the owner suddenly scared into a cold sweat.

Since the find of the above, then how do we properly maintained engine:
1).Using the appropriate level of quality lubricants. Gasoline engine should use SD-SF gasoline engine oil into the exhaust system in accordance with attachments and conditions of use; diesel engines will have to use CB-CD diesel engine oil level according to the mechanical load, a standard not lower than the manufacturer requirements prevail.

2).Three filter maintenance: Three filter is the air filter, oil filter and fuel filter. Three filter in the car engine for air, oil and gasoline plays a filtering effect, which play a protective effect on the engine, but also improve the efficiency of the engine.

3).In time to replace the oil and filter. Any quality grade lubricants in use, the oil will be changed, in order to avoid the occurrence of faults, use a combination of conditions, timely oil changes, maintaining a moderate amount of oil (generally dipstick upper limit as well).

4).Regular cleaning of the crankcase. During operation of the engine, the engine room without combustion gas, acid, water, sulfur and nitrogen, through the gap between the piston ring and cylinder wall into the crankcase, the metal powder mixed with the wear parts produced, the formation of sludge. Therefore, the crankcase should be cleaned regularly to keep the engine clean inside.

5).The engine water tank rust autel maxisys ms906, dirt is the most common problems. Dirt followed coolant flowing in the cooling system, reduces cooling effect, resulting in engine overheating, and even cause engine damage. Therefore, the tank should be cleaned regularly to remove rust and scale them.

6).Regular cleaning of fuel systems, controls coke formation, enabling the engine to maintain the best condition.

7).To keep the crankcase ventilation. Now most of the gasoline engine are equipped with PCV valve (positive crankcase ventilation), but channeling gas pollutants are deposited around the PCV valve, the valve may be clogged. Therefore, subject to periodic removal PCV valve pollutants autel maxisys elite.


Related Links
Back to posts
This post has no comments - be the first one!

UNDER MAINTENANCE